|
| |
莫来石系列浇注料
Series of mullite castable in physico-chemistry properties
|
产品名称及牌号 N.P.B |
莫来石浇注料
Mullite castable |
莫来石高强耐火浇注料
Mullite high strength refractory |
莫来石钢纤维增强浇注料
Mullite steel fibers castable |
莫来石高强喷煤管专用耐火浇注料
Mullite steel fibers castable |
XFN-20 |
XFN-20G |
XFN-20GF |
XFN-20GP |
化学成份
C.C, % |
Al2O3+SiC ≥ |
65 |
75 |
75 |
75 |
SiO2 ≥
|
25 |
20 |
20 |
20 |
| 最高使用温度 M.S.T, ℃ |
1600 |
1650 |
1650 |
1700 |
| 体积密度B.D,g/cm3 110℃×24h≥ |
2.50 |
2.75 |
2.75 |
2.70 |
耐压强度/抗折强度
CCS/MOR,Mpa |
110℃×24h ≥ |
80/10 |
100/10 |
100/10 |
100/10 |
| 1100℃×3h ≥ |
100/11 |
100/12 |
100/12 |
100/12 |
| 110℃×24h ≥ |
|
100/>12 |
100/>12 |
100/>12 |
线变化率R.L.C,
(1100℃×3h),% |
1100℃×3h ≥ |
-0.1~-0.3 |
-0.1~-0.3 |
-0.1~-0.3 |
-0.1~-0.3 |
| 1500℃×3h ≤ |
|
-0.5 |
-0.5 |
-0.5 |
| 加水量 W.R, % |
5.5-6.5 |
5-6 |
5-6 |
5-6 |
| 施工方式 F.M |
振动 Vibration |
| 施工方法 F.W |
参照我公司施工工艺流程 Refer to forming technological routine of our factory |
用途
Usage |
水泥窑前后窑口、冷却机等高温部位及其它工业窑内衬。
Cement kiln above all
front and hind nozzle, cooler etc in hightemp parts and kiln
liner. |
大型水泥窑前后窑口、喷煤管等高温耐磨部位及其它工业炉窑内衬。
Big cement kiln above
all front and hind nozzle,
burner coal pipe etc in
hightemp and wearresistant parts and kiln
liner. |
同XF-20G,但强度及热稳定性优于XF-20G。
Same as XF-20G,but strength and hot resis tancewell above XF-20G. |
大型水泥窑、喷煤管及其它工业炉内衬。
Large cement kiln coal spraying pipe an inner liner of other industrial
furnace. |
特性
Property |
1、具有高温结构强度高,高温蠕变率低,热膨胀小,抗化学侵蚀性强,抗热震等优点。
2、养护、脱模、烘烤时间短、不易爆裂。
1.The advantage of high strength in high-temp sonstrution,low high-temp change in from ratio, small hot-expansion,strong
resisance to chemical attack,resistance to heat shock etc. 2.Nursing,separate mould,
shorten bake time,flame-proof. |
|
PA-80系列浇注料
产品名称及牌号 |
高铝质耐火浇注料
High Al refractory castable |
高铝质钢纤维增强耐火浇注料
High Al Steel fibers add
strength refractory castable
|
高铝质高强耐磨浇注料
High Al strenght wear-
resistant castable |
| XFPA-801 |
XFPA-802 |
XFPA-803 |
化学成份
C.C, % |
Al2O3+SiC ≥ |
75 |
78 |
80 |
SiO2 ≤
|
20 |
20 |
18 |
| 最高使用温度 M.S.T, ℃ |
1500 |
1600 |
1600 |
| 体积密度B.D,g/cm3 110℃×24h ≥ |
2.40 |
2.50 |
2.55 |
| 耐压强度CCS,Mpa |
110℃×24h ≥ |
40 |
50 |
60 |
| 1100℃×3h ≥ |
35 |
40 |
50 |
| 抗折强度MOR,Mpa |
110℃×24h ≥ |
4 |
4 |
5 |
| 1100℃×3h ≥ |
5 |
6 |
7 |
| 线变化率R.L.C,% |
1100℃×3h ≥ |
-0.1~-0.5 |
-0.1~-0.5 |
-0.1~-0.3 |
| 施工用胶量, % Froming liquogel required |
18 |
16 |
16 |
| 施工方式 F.M |
振动 Vibration |
| 施工方法 F.W |
参照我公司施工工艺流程 Refer to forming technological routine of our factory |
用途
Usage |
水泥窑窑头罩、冷却机、分解炉等部位及其它工业炉窑内衬。
The kiln head hood,cooller,divisible furnace
etc of cement kiln and
other industrial kiln
liner. |
水泥窑前后窑口、冷却机、窑头罩、湿法窑窑口、链条带等高温耐磨部位及其它工业炉窑内衬。
The cement kiln above
all front and hind kiln nozzle,cooler,kiln head hood,
wet process kiln nozzle,
chain zone etc,wear-resistant parts. |
水泥窑前后窑口、冷却机、喷煤管等高温耐磨部位及其它工业炉窑内衬。
The high-temp and wear-resistant parts suchus cement kiln notch,cooler, burner coal pipe etc. |
特性
Property |
热震稳定性好,耐磨、可热补抢修,不需养护及低温烘烤。
Good hot resistance, wear-resistant,can hot repair, have no need of nursing and low-temp baking. |
性能优于PA-801。
The property well above PA-801. |
|
上一页 下一页 第一页 最后页 返回目录
|
|
|